Consilium PG11 - Table of Contents

Operating Manual PG11 / PGE11 Page 3
Table of contents
1 Product Description and detection principle 5
1.1 Technical Specifications 6
1.2 Dimensions PG11 7
1.3 Dimensions PGE11 8
1.4 Detection principle of PG11 and PGE11 10
2 Safety and Warnings PG11 11
3 Installation 11
3.1 Installation checklist 11
3.2 Preparations and Positioning considerations 12
3.3 Mounting the detector 13
3.3.1 Pole mounting 14
3.3.2 Duct or pipe mounting 14
3.4 Electrical connections and Earthing 16
3.4.1 Booting up the Gas Detector 17
3.4.2 Performing loop test 18
3.5 Environment Shield for PG11 18
3.6 Sunshade 19
3.7 Mosquito net 20
4 Commissioning the Gas Detector 20
5 Operation 21
5.1 Function test 21
5.1.1 PG11 function check with the “Gas Test kit” 22
5.1.2 PG11 Function check with the “Gas Test kit” 23
5.1.3 PG11 Function check using the “Gas nozzle” 23
5.1.4 PG11 Function check with the “Remote Gas Test kit” 24
5.1.5 PGE11 short and medium Function check 26
5.2 Perform a check of the Gas Detector accuracy 27
6 Maintenance 28
6.1 Cleaning of optics - lens and mirror 28
6.2 Inspecting detector for damage 28
6.3 Keeping a stable Zeroing of the Detector 29
6.3.1 The OptoBAS™ function 29
6.3.2 Manual zero adjustment 29
6.4 Self Diagnostics 29