64 65
• Tap Add to make another call separately from the first call, which is put
on hold.
• Tap Contacts to go to contacts.
• Tap Keypad to switch to the keypad when you need to enter a code (for
example, the PIN for your voicemail) during the call.
• Tap Mute to mute or unmute the microphone.
• Tap Merge to merge the separate calls into a single conference call.
• Tap Swap during voice calls or > Swap during RTT calls to put the
caller you are speaking to on hold, and switch to the other call that has
been put on hold.
• Tap > RTT to switch from voice-only calls to RTT calls.
• Tap to end the current call.
• During a RTT call, tap > Hide RTT keyboard to close the RTT conversation
and keyboard. You can then tap
> RTT to restore them.
• During a RTT call, tap > DTMF keypad to use DTMF tones to interact with
automated systems. You can tap Hide to return to your RTT messages.
MANAGING MULTI-PARTY CALLS
When the call waiting and the conference call features are available, you can
switch between two calls or set up a conference call.
NOTE: Options and interface will vary. The call waiting and conference call
features need network support and may result in additional charges. Please
contact customer service for more information.
PHONE CALLS
Switching Between Current Calls
When you’re on a call, you can place/answer a second call without ending the
first one.
To place a second call:
After the first call is connected, tap Add and dial the second number.
To respond to an incoming call while you’re on a call:
• Swipe up to put the first call on hold and answer the second call.
• Swipe from to answer the second call and end the first one.
• Swipe down to reject the second call.
• Swipe from to reject the second call and select a preset text message
or edit one to send to the caller.
To switch between two calls:
• During voice calls, tap Swap.
• During RTT calls, tap > Swap.
Setting Up a Conference Call
With this feature, you can talk to two people at the same time.
1. Place the first call.
2. Once you have established the connection, tap Add and dial the second
number or answer the second call and put the first on hold.
3. When you’re connected to both parties, tap Merge.
PHONE CALLS
To Next Page
Loading...
