MANUALP/4000_SERVICE_0712 July2012
68
Servicing Procedure:
Replacing the Heated Glass Door
The instruction below demonstrates how to replace the heated glass. Suitably
qualified electrical personnel should only carry out this procedure.
Schedule of servicing:
As and when needed.
Safety requirement:
Ensure that the cabinet’s power cord is unplugged from the power source
before attempting to remove and replace the glass door.
Servicing Procedure:
1. Ensure the safety requirements are in place.
2. Below is a typical layout of the heated glass door. Note that some
model may have single glass door only.
For a dual glass door model, the
bottom glass door has a seal
mounted on top of it to close any
gap between the 2 glass doors.
Arrow points on the seal on
top of the bottom glass door
to close any gap between the
top & bottom glass doors.
To Next Page
Loading...
