Contrec 212 - Page 23

212-M-V2.1
Operation 21
Parameter Value Description
If 4-20mA Output is installed:
8. 4-20mA Flow
Pwr
∆t°
Ft°
Rt°
Defines the parameter to be output
as a 4-20mA signal.
9. 4mA xxxx.xxx Flowrate or temperature which
corresponds to 4mA.
10. 20mA xxxx.xxx Flowrate or temperature which
corresponds to 20mA.
12. PULSE Ener
Volu
Defines whether the pulse output is for
the energy or volume total.
13. PULSE xxx.x kWh Defines how often a pulse is
output.
14. PULSE 10 ms
20 ms
50 ms
100 ms
200 ms
500 ms
Defines the pulse width.
15. COMMS NONE
M-BUS
RS485
No Communications.
Meter-bus (see Section 4).
Modbus RTU.
16. BAUD xxxx
Communications baud rate between
300 and 9600.