212-M-V2.1
28 Operation
3.7 PEAK AND OFF-PEAK
When the Model 212 is programmed for either Heating, Cooling or Heating
and Cooling, it is possible to program Peak and Off-Peak times. This enables
the Model 212 to record Energy totals in two separate registers, depending
on the time of day.
A 24 hour period can be programmed as having one peak period and one off-
peak period. For example, if "PEAK ON" is programmed as 09 and "PEAK OFF"
is programmed as 18, then between 9.00am and 6.00pm totalisation would
occur in the Peak register and between 6.00pm and 9.00am, totalisation would
occur in the Off-Peak register.
To Next Page
Loading...
