Contrec 212 - Page 41

212-M-V2.1
Communications 39
Register Name Value Note
16 K-factor 0.001...999,999.9 FP
18 Cutoff frequency 0.01...0.99 FP
If High and Low Alarms are installed:
20 Relay 0 setpoint 0.000...999,999.9 FP
22 Relay 1 setpoint 0.000...999,999.9 FP
If 4-20mA Output is installed:
20 4mA setpoint 0.000...999,999.9 FP
22 20mA setpoint 0.000...999,999.9 FP
24 Pulse out setpoint 0.000...999,999.9 FP
Read Only Registers
Register Name Value Note
26 Energy 0 FP
28 Energy 1 FP
30 Accumulated energy 0 FP
32 Accumulated energy 1 FP
34 Volume FP
36 Accumulated volume FP
38 Not Used FP
40 Not Used FP
42 Elapsed time FP
44 Accumulated elapsed time FP
46 Power FP
48 Peak power FP
50 Volume flow FP
52 Not Used FP
54 Flow temperature FP
56 Return temperature FP
58 Temperature difference FP
60 Supply failures
61 Exception register 00 - no failure
01 - RTD failure