212-M-V2.1
4 Overview
The Model 212 has a highly accurate built-in real time clock (2ppm typ) to
keep track of logging, peak-on/peak-off points, etc. In case of a power
failure, the real-time clock is able to keep running for two days with a ±1
minute accuracy, typically.
RoHS Directive: 2011/65/EU
EN 50581:2012 :- Technical documentation for the assessment of electrical and electronic
products with respect to the restriction of hazardous substances
EMC Directive: 2014/30/EU
EN61326:2013 :- Electrical equipment for measurement, control and laboratory use – EMC
requirements : Residential, Commercial & Light Industry Environment & Industrial
Environment.
Low Voltage Directive: 2014/35/EU
EN61010:2010 :- Safety requirements for electrical equipment for measurement, control and
laboratory use.
In order to comply with these standards, the wiring instructions in Section 7.5
must be followed.
To Next Page
Loading...
