5604 Input/Output (I/O) Module - Hardware Manual
October 19, 2007
11 Approvals and Certifications
Non-Incendive Electrical Equipment for Use in Class I, Division
2 Groups A, B, C and D Hazardous Locations.
FCC Part 15, Subpart B, Class A Verification
EN61000-6-4: 2001 Electromagnetic Compatibility Generic
Emission Standard Part2: Industrial Environment
C-Tick compliance. Registration number N15744.
EN61000-6-2: 2001 Electromagnetic Compatibility Generic
Standards Immunity for Industrial Environments
This product conforms to the above Emissions and Immunity
Standards and therefore conforms with the requirements of
Council Directive 89/336/EEC (as amended) relating to
electromagnetic compatibility.
P1 (5604) and P1B (5606 Models with digital inputs configured
below 30Vdc/60Vac are eligible to bear the CE mark. The Low
Voltage Directive is not applicable to these products in
applications below 30Vdc/60Vac.
The Low Voltage Directive is not applicable to the P1A (5604)
Model and is eligible to bear the CE mark.
To Previous Page
Loading...