15 Approvals and Certifications
Safety
Non-Incendive Electrical Equipment for Use in Class I, Division
2 Groups A, B, C and D Hazardous Locations.
Digital
Emissions
FCC Part 15, Subpart B, Class A Verification
EN61000-6-4: 2001 Electromagnetic Compatibility Generic
Emission Standard Part2: Industrial Environment
Immunity
EN61000-6-2: 2001 Electromagnetic Compatibility Generic
Standards Immunity for Industrial Environments
Declaration
This product conforms to the above Emissions and Immunity
Standards and therefore conforms with the requirements of
Council Directive 89/336/EEC (as amended) relating to
electromagnetic compatibility.
P4 (5601/A) and P4B (5606) Models with digital inputs
configured below 30Vdc/60Vac are eligible to bear the CE
mark. The Low Voltage Directive is not applicable to these
products in applications below 30Vdc/60Vac.
The Low Voltage Directive is not applicable to the P4A (5604)
Model and is eligible to bear the CE mark.
SCADAPack 32 Controller Hardware Manual
May 24, 2006
54
To Previous Page
Loading...
