Hibernating a VFC400-WiFi VFC400-WiFi User Guide 50
A hibernated logger has no active display, however a button
press will wake the logger up briefly. The display will show:
l
the text NOT READY
l the battery capacity of the AAA batteries (if the batteries
have been removed, the empty symbol
will be
shown)
After a few seonds SLP will be shown on the display, and the
display will turn off.
The logger reverts to being hibernated.
A hibernated logger cannot be reactivated via the buttons - it must be reconfigured with Control
Solutions VTMC.
To Next Page
Loading...