Appendix H: Custom Web Pages X-600M Users Manual
Note: Settings must be committed for this change
to take effect. See db.commitSettings() below.
update(id, name, luaExpr, desc,
eventSourceID, callback)
Update an action with the specified id.
Parameters are the same as those for the add
function.
Note: Settings must be committed for this change
to take effect. See db.commitSettings() below.
del(id, callback) Delete and action with the specified id.
Note: Settings must be committed for this change
to take effect. See db.commitSettings() below.
evnt add(name, desc, dtStart, dtEnd,
freq, interval, byday,
monthlyRepeatType, untilType,
dtUntil, count, eventGroupID,
callback)
Add a calendar-based event.
name - name of event
desc - description of action
dtStart - when to start event (mm/dd/yyy
hh:mm:ss hh=24hour)
dtEnd - when to end event (same format as
dtStart)
freq - NONE, SECONDLY, MINUTELY, HOURLY,
DAILY, WEEKLY, MONTHLY, YEARLY
interval - how often, in terms of the freq, to repeat
the event
byday - bitmask that indicates what days event
should occur when the freq equals WEEKLY
(saturday = bit 7, sunday = bit 0)
monthlyRepeatType - how to repeat when freq
equals MONTHLY.(DOM = day of month, DOW =
day of week)
untilType - NEVER, COUNT, DATE (what to look
for to stop repeats of event)
dtUntil - when to stop repeats of event (only when
untilType = DATE. Format the same as dtStart)
count - how many times to repeat
event (only when untilType = COUNT)
eventGroupID – the event group that the event
belongs to (1-8)
callback - function to call after completing with
result
Note: Settings must be committed for this change
to take effect. See db.commitSettings() below.
update(id, name, desc, dtStart, Update a calendar based event with the specified
Page 146 Xytronix Research & Design, Inc.
To Next Page
Loading...