Configuration and Setup X-600M Users Manual
the user places components. A component can be an on/off button labeled “Suite #1 lights”, a
temperature readout or other resources. Components are available for control, status, logging
and graphing. Components can be buttons, sliders, display boxes, etc.
Step 6. View Dashboards
The View Dashboards menu tab presents a display similar to what users will normally see
when accessing the X-600M. Use this page to test and debug the dashboards, panels, widgets
and components in real time.
3.5 Setup Example
The Quick Start Demo
After making the power and Ethernet connections, the X-600M can automatically scan for the presence
of any ControlByWeb Ethernet devices (on the same sub-net) and also for of any expansion modules
connected to the X-600M via the ribbon cable connector. It can also automatically create a dashboard
web page and populate it with all of the resources (components) supported by the Ethernet devices and
expansion modules.
To quickly add a device do the following:
1. Click on the Devices menu tab to pull up the Devices Overview page. Then click on the Find New
Devices button to scan the expansion bus and the local network for ControlByWeb devices and
expansion modules.
2. In this example we are going to add an X-11s (2 Relay expansion module.) Click the Add button for the
X-11s.
Page 26 Xytronix Research & Design, Inc.
To Next Page
Loading...