Configuration and Setup X-600M Users Manual
3.3 Configuration and Setup Access
The X-600M is configured using a web browser. To access the setup pages, enter the following URL in
the address bar of a web browser:
http://{ipaddress}/setup.html
For example, using the default IP address, enter:
http://192.168.1.2/setup.html
If you are using the “config via DHCP” method described in Method 1 above enter:
http://X600.local/setup.html
Before editing the setup pages, you will need to enter a username and password. The default username
is admin and the default password is webrelay (password is case sensitive).
The left side of the configuration and setup pages have click-able menu tabs (above right) which provide
access to specific configuration and setup settings. With all of the setup pages, if no activity is detected
for 30-minutes the user is automatically logged out. If this happens, your browser page should
automatically be redirected to the login page. To restore the setup session again, enter the setup URL
(http://{ipaddress}/setup.html) into address bar of your web browser (if not already there) and reenter the
username/password. The control and display (non-setup) pages are called dashboard pages
(http://192.168.1.2/index.html) and are not monitored for inactivity. The dashboard pages can remain
open indefinitely.
The setup pages are divided into seven setup sections: System, Network, Devices, I/O,
Control/Logic, Logging, and Edit Dashboards. The eighth section, View Dashboards, is for viewing
and testing the dashboards. Each of the setup tabs is described in the following sections.
Note: The X-600M setup pages require a modern web browser with javascript enabled to function
correctly. These browsers include Internet Explorer 9 and above, and latest versions of Chrome, Firefox
and Safari. If configuring the X-600M on a mobile device make sure to use a web browser that supports
pop-up windows. Once the X-600M is configured, the Dashboards are viewable by all modern web
browsers on mobile devices.
3.4 Basic Setup Strategy
The X-600M is configured and programmed using its built-in web pages. The configuration can be quick
and simple for small systems or require more design and thought for complex systems. The X-600M is
both easy to use and yet still has the resources to handle complex applications. You can start with the
Page 24 Xytronix Research & Design, Inc.
To Next Page
Loading...