X-600M Users Manual Configuration and Setup
3.1.2 Method 2: Assign a Temporary IP Address to the Configuration Computer
If the first option above is not used, you can use this option to communicate with the X-600M. By default,
the X-600M comes from the factory with an IP address of 192.168.1.2. Communication with the X-600M
may be established by assigning an IP address to the configuration computer such that it is on the same
network as the X-600M (for example, the configuration computer could be assigned to 192.168.1.50)
The following example is for those running the Windows-8 operating system:
1. Apply Power, wait 15 seconds for the X-600M to become operational, and then connect the Ethernet
cable.
2. Open the Windows 8 start screen
3. Type “Control Panel” and press enter (the search box opens automatically when you begin typing).
4. Click or touch View network status and tasks.
Xytronix Research & Design, Inc. Page 19
To Next Page
Loading...