X-600M Users Manual Setup Pages
Name:
This is the name of the conditional event.
Description:
This is a simple description of the conditional event for documentation purposes.
Type:
Digital
Analog
Complex
Select Digital if the conditional event can be done with a Boolean (logic) operation (On, Off, Etc).
Select Analog if the conditional event can be done with a magnitude compare between two values.
Select Complex if the basic logic or magnitude compare offered is insufficient and you wish to
generate the event with a more flexible Lua script.
Eval on powerup:
This check box determines if the conditional event is evaluated on power-up or not.
Duration:
The conditional event can be further qualified with a “glitch” or “de-bounce” filter. The conditional
event will not trigger until (1) the condition has changed states and (2) the condition has remained in
that state for a user-specified duration (in seconds). The default duration is 0-seconds (no glitch
filter).
Event Group:
Events can be grouped together. Select here which event group this event should belong to. Event
groups can be Enabled and Disabled. When an event group is disabled, all events belonging to
that group will stop being evaluated until the event group is enabled again.
4.5.1.1 Digital Event
If Digital is selected, several digital-specific settings appear.
Xytronix Research & Design, Inc. Page 69
To Next Page
Loading...