ControlByWeb X-600M - System > User Accounts (Add, Edit, and Delete User Accounts)

X-600M Users Manual Setup Pages
control remote relays belong to the CBW group. This means in this example that a ControlByWeb
device that is configured to control a remote relay on the X-600M, can only control relay 3, relay 4, relay
6, or relay 7.
Another thing to mention is that each access group has a read/write setting. In the previous example,
each group was configured for read and write, meaning that the I/O belonging to those access groups
could be monitored and controlled by the users in those same access groups. If, on the other hand, the
User access group was configured as a read only access group, then Jennifer, Ryan and Mike would
only be able to monitor relay 2, relay 4, relay 5, and relay 6. No control would be available.
4.1.2 System > User Accounts (Add, edit, and delete user accounts)
The X-600M can support up to 250 individual User Accounts. Each user account is shown in a separate line.
Click Add New User to create a new user account. The settings and passwords for each user account can
be changed by clicking the Edit icons.
Each user is assigned a password and one or more Access Groups (enable Dashboard and I/O
Password Protection under the System > Overview menu tab in order to view and change Access
Group settings). Users who are assigned to an access group will have access to any I/O and
dashboards that also belong to that particular access group. Users have passwords, Groups do not.
Note: Email alerts can be sent to users (or groups) - These users can be set up to receive email alerts
only while having no access to the dashboards and I/O.
Xytronix Research & Design, Inc. Page 33