Configuration and Setup X-600M Users Manual
Select the radio button labeled "Use the following IP address" and type in the IP address:
192.168.1.50
Type in the subnet mask:
255.255.255.0
No need to change the default gateway field. Click OK to accept the new settings.
9. Open the setup pages by entering the following URL in the address bar of a web browser:
http://{ipaddress}/setup.html
(For example: http://192.168.1.2/setup.html)
Note: If the setup pages are not accessible, verify that the X-600M is powered on and that the LINK light
is illuminated. Check all network connections and settings.
Another way to check communications is to ping the X-600M from the command prompt by typing:
ping [ipaddress] (e.g. ping 192.168.1.2)
Page 22 Xytronix Research & Design, Inc.
To Next Page
Loading...