Configuration and Setup X-600M Users Manual
monitor and control of I/O. The admin and cbw groups have special features.
admin: Users who log-in and have admin privileges will see the setup page(s), all others will not have
access to these pages and cannot change the configuration of the device. If you want to configure
dashboards, connected devices, etc, you must belong to the admin Group. All I/O and dashboards
belong to this group by default.
user: Users who log-in and have user privileges will, by default, have access to all of the dashboards
and I/O, but will not have access to the setup pages.
group1: This is a general purpose group that can be customized and renamed as needed.
group2: This is a general purpose group that can be customized and renamed as needed.
cbw: This Group uses a legacy password scheme employed by older ControlByWeb products.
Only I/O that belong to this group can be controlled by older ControlByWeb products.
The X-600M can support up to 30 individual user accounts. Each user is assigned a name and
password, and can be assigned to one or more access groups. Users assigned to a group will have the
access privileges of that group. Users have passwords, groups do not.
Users, I/O, and dashboards can be assigned to an access group. When users and I/O belong to the
same access group, those I/O can be controlled and monitored by those users. When a user and
dashboard belong to the same access group, that dashboard can be viewed by that user. If a user, I/O,
or dashboard do not belong to the same group, those items cannot be controlled/monitored by that user.
Page 30 Xytronix Research & Design, Inc.
To Next Page
Loading...