Setup Pages X-600M Users Manual
allow the X-600M to be accessed through a web browser using a human readable name instead of an IP
address. This name is only valid on the local network. NetBIOS is used with computers running
Windows OS. mDNS is used on computers running MAC OS X.
NetBIOS Enabled:
Allow Windows machines to locate the X-600M by name.
mDNS Enabled:
Allow MAC OS X machines to locate the X-600M by name.
Local Host Name:
The X-600M broadcasts information about itself to services running on your PC (NetBIOS and
mDNS) and identifies itself with the URL defined by this setting. The default name is “x600”. When
accessing the X-600M using this name from a web browser, append “.local” to the name. For
example: http://x600.local/setup.html will open the setup pages of the device when
NetBIOS/mDNS are enabled and there are no devices with conflicting names on the network.
Page 54 Xytronix Research & Design, Inc.
To Next Page
Loading...