Setup Pages X-600M Users Manual
Model Number:
The model number of the device being added/edited.(The X-300 has two model number options: X-
300-I and X-300-TSTAT. Select X-300-I for an X-300 in temperature monitor mode. Select X-300-
TSTAT for an X-300 in thermostat mode.)
Name:
A short (20 characters max), descriptive name made up of only alphanumeric characters. Names
must begin with a lowercase letter. The names are used by the internal logic and Lua scripts.
Description:
The device description must be 60 characters or less. The device's description appears in
Dashboards and Email messages.
Serial Number:
The serial number for the ControlByWeb device. When the Ethernet Communication Type for the
device is Remote Services, the X-600M uses the serial number to communicate with the device.
Address:
For Ethernet-enabled devices, this field holds either the IP address of the device, or a fully qualified
domain name. When the Ethernet Communication Type for the device is IP Address, the X-600M
uses the address field to communicate with the device. See the section Remote Services Server for
more information.
Port:
For Ethernet-enabled devices, this field holds the port number that the device listens on. For
expansion bus devices, this field is not used.
Ethernet Comm. Type:
For Ethernet-enabled devices, this field determines how the X-600M will establish a connection with
Page 56 Xytronix Research & Design, Inc.
To Next Page
Loading...