Cool Automation CoolPLug - Page 24

CoolPlug CooLinkHUB HVAC Bridge CoolPlug Operation
QIG Version 2.2 24 CoolPlug CooLinkHUB
Determining the CoolPlug UID
The CoolPlug UID is flashed after one
‘Short’ press on the CoolPlug push-
button.
Toggling the HVAC ON/OFF
Toggle the HVAC state ON/OFF with one
‘Long’ press on the CoolPlug push-button.
Resetting the CoolPlug
Reset the CoolPlug with one ‘Short’ press
followed by one ‘Continuous’ press on the
CoolPlug push-button.