23COOLIUS A50
MESSAGE: If the equipment senses a pressure
lower than the minimum value for the process.
The process starts.
MESSAGE: If the equipment senses a pressure
lower than the minimum value for the process.
• Replace the external tank, then press START key to
conrm.
• Press STOP key to complete the process.
The process is completed.
6. Close the tank valve and disconnect the red hose from
the tank.
Press START key to conrm.
7. Press STOP key to end.
The machine now performs a self-cleaning process
See chapter 4.6 Automatic Internal ushing p. 20
if “Automatic internal ushing” is activated under
MACHINE SET-UP
See chapter Automatic internal
ushing. p. 19
.
Otherwise it goes to stand-by mode.
Check:
Ext. tank empty or
tank valve closed.
Vessel charge in
process.
Pressure mb.
Refrigerant g./////
Check:
Ext. tank empty or
tank valve closed.
Vessel charge end.
Close the external
tank valve.
Refrigerant recovery
from the
service hoses
Vessel charge end.
g./////