26
COOLIUS A50
11. At the end of the processes,
start the engine and A/C system, then check the pres-
sures.
12. At the end of the verication, press STOP key to end.
Perform the instruction.
13. Press START key to conrm.
At the end, all the process values are reported on the
display.
14. Press STOP key to end.
Equipment with printer:
See chapter 4.2 Using the printer
p. 14
15. Press START key to print or STOP key to skip.
The machine performs a self-cleaning process
See chapter 4.6 Automatic Internal ushing p. 20
if
“Automatic internal ushing” is activated under
MACHINE SET-UP
See chapter Automatic internal
ushing. p. 19
.
Otherwise it goes to stand-by mode.
Verify the A/C
system pressures.
Disconnect the HP/LP
service hoses from
the A/C system.
Refrigerant recovery
from the
service hoses
Recovery
Refrigerant g. ////
PAG Oil ml. //
Vacuum
mb. ///
A/C system charge
Quantity g. ////
To Next Page
Loading...