Cooper DF6000 - Evacuate (Access Level 2)

DF6000 - USER MANUAL
55
Evacuate (Access Level 2)
To activate the touch screen, touch the top left corner of the screen until the screen illuminates. To enter
the supervisor mode touch the supervisor button and enter the passcode.
Enter the Supervisor Mode Passcode and select “Evacuate” on the menu at the top of the screen.
Select “Yes” to evacuate the building.
Section 4 - Panel Controls and Indicators
Reset
Silence
Alarms
Supervisor
FRE off
Mute
Buzzer
Pre-alarm = Some smoke / heat but below fire threshold
these warnings will appear and disappear
Evacuate
View Fires
AC = 0
View Pre
Alarms
View
Disabled
View
Faults
Others
This will activate ALL sounders
and activate all panel relays
Do you wish to continue?
Supervisor
FRE Off
Yes No