10.2. D/R
16
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
D/R operation for AILE
Operation:
1. Press “up” to select “FUN.MENU”, and press “ENTER” to come to the interface.
2. Press “up” or “down” to select “D/R”, and now the shadow area is the item that can be set
currently. Press “ENTER” to go to the next step.
3. Press “A/E/R D/R” to select “AILE D/R”, and LCD shows the corresponding “AILE0” or “AILE1”
4. Press “up” or “down” to select “H” or “L”, and press “INC” or “DEC” to set the corresponding value
and dual band curve will change accordingly.
5. Set “AILE D/R” switch on the top of the transmitter. When “A/E/R D/R” is in “0” position, LCD
shows “AILE0”, and now you can set D/R value for “AILE0”. And when “A/E/R D/R” is in “1” position,
LCD shows “AILE1”, and now you can set D/R value for “AILE1”
6. After your setting, press “EXIT” to save the setting and leave the operation.
DR AILE0
H
I
O
L
0
0
100
45
A/E/R D/R
0
1
AILE DR SW
POS0/POS1
D/R operation for ELEV
Operation:
1. Press “up” to select “FUN.MENU”, and press “ENTER” to come to the interface.
2. Press “INC” or “DEC” to select “D/R”, and now the shadow area is the item that can be set
currently. Press “ENTER” to select “ELEV D/R”.
3. Move “up” or “down” button to select “H” or “L”, and press “INC” or “DEC” to set the corresponding
value and dual band curve will change accordingly.
4. Set “ELEV D/R” switch on the top of the transmitter. When “A/E/R D/R” is in “0” position, LCD
shows “ELEV0”, and now you can set D/R value for “ELEV0”. And when “A/E/R D/R” is in “1” position,
LCD shows “ELEV1”, and now you can set D/R value for “ELEV1”
5. After your setting, press “EXIT” to save the setting and leave the operation.
DR ELEV0
H
I
O
L
0
0
100
45
A/E/R D/R
To Next Page
Loading...