19
CX-CT6C
2.4GHz 6 Channel FHSS Technology
Digital Proportional Radio System
10.6. SWASH.MIX
Swash mix (only for CCPM three servos 120° helicopter)
Operation:
1. Press “up” to select “FUN.MENU”, and press “ENTER” to come to the interface.
2. Press “up” or “down” to select “SWASH.MIX”, and now the shadow area is the item that can be set
currently. Press “ENTER” to go to the next step.
3. Press “up” or “down” to select “AILE”, “PITCH”, “ELEV”.
4. Press “INC” or “DEC” to set the value of each channel.
5. After your setting, press “EXIT” to save the setting and leave the operation.
ENTER
FUN.MENU
SWASH.MIX
GYRO.SENE
CH.REV
FUN.MENU
SWASH.MIX
GYRO.SENE
CH.REV
SWASH.MIX
AI LE
PIT H
ELEV
-50
-50
-50
10.7. GYRO.SENS
Gyro sensitivity adjustment
Operation:
1. Press ‘up” to select “FUN.MENU”, and press “ENTER” to come to the interface.
2. Press “up” or “down” to select “GYRO.SENE”, and now the shadow area is the item that can be set
currently. Press “ENTER” to go to the next step.
3. Set “GYRO.SENS” switch on the top of the transmitter: When “GYRO.SENS” is in “0” position, LCD
shows “POS 0”, and now you can set the value for “POS 0” by “INC” or “DEC”. When “GYRO.SENS” is
in “1” position, LCD shows “POS 1”, and now you can set the value for “POS 1” by “INC” or “DEC”.
4. After your setting, press “EXIT” to save the setting and leave the operation.
ENTER
GYRO.SENS
To Next Page
Loading...