CopterX CX-CT6C - 6 CX-CT6 C Basic Features; 7 LED Displaying Board Function

To Next Page

To Previous Page

CX-CT6C

2.4GHz 6 Channel FHSS Technology

Digital Proportional Radio System

6. CX-CT6C Basic Features

1. Pitch neutral trim

2. Output standard 6 channel signal and support 2.4G sytem

3. Support 3D fly mode, normal fly, idle 1 fly and idle 2 fly (in the idle mode)

4. D/R for Aileron, elevator, rudder

5. Throttle hold function

6. Gyro sensitivity adjustment

7. Channel neutral position setting

8. Channel reverse and channel servo travel adjustment

9. Six models data memory

10. LED will blink with alarming when the voltage is low

NOTE: If “THRO HOLD” is shown on LCD when you turn on the power, please move “TH. HOLD”

switch to the position 0, otherwise, you can not properly enter power on interface.

NOTE: If “IDLE ON” is shown on LCD when you turn on the power, please move “IDLE” switch to the

position N, otherwise, you can not properly enter power on interface.

THRO HOLD

10.0V CT6C

SYS.

FUN.

TH. HOLD

IDLE ON

10.0V CT6C

SYS.

FUN.

IDLE

7. LED Displaying Board Function

“POWER” LED

The light keeps on with blue color in normal power-on condition. When

the voltage is below 4.0V, the light blinks with alarming. Now please exit

the operation and change new battery.