Cord One - Operation Instructions; Installation Preparations; Tools Required; Cables and Materials

9
4.1 Installation preparation
4.1.1 Tools required
Tool Name Photo Function
Multimeter
Test electrical connection and electrical
parameter
Cross Head Screwdriver Screw tightening
Electric drill Drilling of mounting holes
Diagonal Pliers Cable cutting
4.1.2 Cables & materials
Name Specication Quantity
Power supply cable
Single-phase power supply cable
Maximum Cross-Sectional Area: 6mm²
As required
RCBO Type A 1
Theuseofextensioncords,adapters,andconverteradaptersisstrictlyprohibited.
4.2 Installation process
4.2.1 Installation notice
• Electricaldevicesshouldonlybeinstalled,operated,andmaintainedbyqualied
technicians. No responsibility is assumed by the manufacturer for issues arising as
aconsequenceofinstallationbyanunqualiedperson.Aqualiedtechnicianisan
electricianwhohascertiedskillsandknowledgerelatedtotheconstruction,
installation,andoperationofthistypeofelectricaldeviceandwhohasreceived
safetytrainingtorecogniseandavoidthehazardsinvolved.
• Allapplicablelocal,regional,andnationalregulationsmustbeappliedwhen
installing,repairing,andmaintainingthisdevice.
Operation Instructions
4