WLBARGO Manual
24 25
(5) Open the web browser (IE 6.0), and test with any website for testing the
connection.
*Note: If the connection to the website fails. Please make sure the data you entered are
correct , or any mistake occured in the process of the installation, such as the
LAN/WAN connections. After verifying that, repeat these setps in the section.
4.1.3 Float IP (PPPoE)
(1) If you are subscribing Float IP connection (or known as PPPoE) from your
ISP, you need to obtain a set of username and password from your ISP and
acquire a IP address each time your connect to the Internet, select [PPPoE],
and then Next].
(2) Enter the username and password provided by your ISP, and click on [Next].
To Next Page
Loading...
Need help?
General