WLBARGO Manual
32 33
The chapter will briefly introduce all functions of this product, and spell them
out. Log in the management program and the below interface will appear.
6.1 Features
<Mode>
Mode Select and switch to Router(wireless broadband
router) or AP(Acess point) mode.
*Note:When switch to AP mode, the product will
stop sending IP, the WAN port will not be function.
The LAN port will also turn to general Hub function.
Therefore, we suggest user to use the default router
mode setting.
Wireless Function Wireless Enable: enable the wireless function.
Wireless Disable: disable the wireless function.
6
Function Introduction
To Next Page
Loading...