To prevent from unlawful access to your network, you are recommended to
perform wireless security setting. Type [192.168.1.1] in the browser’s address
bar, press [Enter]. Enter the function menu, ad click on [802.11g/b Security set-
ting] item. And select WEP or WPA setting.
5.1 WEP Setting
In order to prevent your information from being hacked, it is recommended to
use WEP encryption when using wireless connection.
(1) Select [WEP] from Authentication menu.
(2) Select [WEP] from Cipher menu
(3) Select [64-bit] or [128-bit] from the Encryption menu.
(4) Type encryption code in [Key1].
*64 bit: hex (0~9, a~f ), 10 digits in total.
*128 bit: hex (0~9, a~f ), 26 digits in total.
Or you can click [Generate Key] to obtain a password automatically:
a. Enter any character in the column of [Auto generate WEP].
b. Click [Generate Key].
c. Passwords will be generated automatically in the columns of Key1 ~ Key4.
*P.S. Every kind of network adapter might have different encryption ways, so [Generate
Key] isn’t recommended. Check before selection.
(5) Recommended to keep default value of [DTIM] .
(6) Save your settings by [Save].
5
Wireless Security Configuration
To Next Page
Loading...
Need help?
General