EasyManua.ls Logo

Corega CG-WLBARGO - WAN Setting for PPPoE Connection

Default Icon
57 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WLBARGO Manual
34 35
34 35
<WAN setting ( World Wide Web )>
The internet setting can be configured, according to your internet connection
type, [WAN Speed] - default setting is recommended.
A. For [PPPoE]:
Username Please enter username, given by your ISP.
Password Please enter password, given by your ISP.
Password confirm Please type your password again.
Service name Please enter your ISP name. (optional)
Connection type [Auto Reconnect]: always on line (recommended).
[On Demand]: connect when accessing to Internet.
[manual setup]: manually connecting to internet.
IdIe Timeout Setup the maximum idle time.
Authentication
and MTU value
Maximum Transmission Unit. Default setting:1454
Byte.
DNS Server Select [Auto Setup] or [Manual Setup] to configure
DNS1 and DNS2 servers.

Table of Contents