Corega CG-WLBARGO - Corega WLBARGO Product Installation; Hardware Installation Steps; Initial Installation Procedure

To Next Page

To Previous Page

4 54 5

WLBARGO Manual

4 5

2.1 Hardware Installation

Following the steps below to set up WLBARGO and the connection.

(1) Insert the cable connector into the Network Adapter embeded in PC, and

insert the other side into one of LAN ports (1~4) of the Router.

(2) Insert the connect into the WAN port of the Router and insert the other side

into the modem.

(3) Connect the Power Adapter, and plug in the AC power.

WAN

LAN

corega WLBARGO

Modem

2.2 Installation Procedure

To ensure successful installation, following the below steps after confirming all

installation data and/or equipment.

Install the hardware -> PC setting -> Open the browser (such as IE 6.0), and

type [192.168.1.1] in the browser’s address bar, and press enter. -> User name:

root, leave Password empty, and press Submit. ->Select [Quick Installation

Setting] for quick installation->Setting the Wirless Security->Use PC with com-

patible wireless card for wireless connection.

Product Installation