Corghi A 2030 - TYRE INFLATION; SAFETY INDICATIONS

A 2030 - A 2025 - A 2022 - A 2018 - A 224 A - A 224 Operator’s manual 115
EN
8.8. TYRE INFLATION
8.8.A. SAFETY INDICATIONS
• RISK OF EXPLOSION
• Never exceed tyre pressure recommended by
tyre manufacturer.
• Always match the tyre and rim dimensions.
• Take care to avoid any damage to the tyre.
• During inflation, keep outside the vertical
cylinder area occupied by the wheel.
DANGER
It is not permitted to use ination devices (e.g. gun) connected to power sources
outside the machine.
DANGER
Always observe national safety regulations, which can be more restrictive than this
manual, according to the principle that a higher standard prevails over a lower one.
CAUTION
If the tyre operating pressure, required for
a certain vehicle, exceeds the value of the
ination limiting valve, it should be obtained
by positioning the tyre and wheel on a suitable
safety device
DANGER