Corghi A 2030 - LABELS PLACEMENT

A 2030 - A 2025 - A 2022 - A 2018 - A 224 A - A 224 Operator’s manual 81
EN
22. Before starting the machine, the operator must pay close attention to the warnings
of the adhesive labels afxed to the equipment.
23. Disconnecting the pneumatic supply, both due to non-use or to maintenance of the
machine or the pneumatic system of the workshop, can leave
pneumatic actuators under pressure. Discharge the machine
pneumatic system using the controls on the actuators.
24. Use a lifting device if the wheel weighs more than 10 kg, with a
lifting frequency of more than 20 wheels/hour.
1.2.b. LABELS PLACEMENT
No. Part Number Drawing Description
1 4-103881
LABEL, CORGHI LOGO
FRONT
2 461236
LABEL, CORGHI LOGO
LATERAL
3 446429 LABEL, OPERATING PRESSURE
4 446442
LABEL, DANGER - PRESSURISED
CONTAINER
5 4-113355 LABEL, FILTER
6 446598
LABEL, SWITCH OFF THE
POWER
7 418135 LABEL, ROTATION DIRECTION