EasyManua.ls Logo

Corghi A 2030 - Page 79

Corghi A 2030
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A 2030 - A 2025 - A 2022 - A 2018 - A 224 A - A 224
Operator’s manual 79
EN
5. Never bring your head or
other body parts close to
a tyre during inflation or
bead insertion operations.
This machine is not a safety
device against the possible
risk of explosion of tyres, air
chambers or rims.
6. Keep a safe distance from the
tyre changer during ination,
in order to remain outside the vertical cylinder area occupied by the wheel. Do not
approach it.
A bursting tyre can cause projections of its parts in surrounding areas with a force
sufcient to cause serious injury or death.
Do not mount a tyre if its dimensions (indicated on the side) do not correspond
exactly to the rim dimensions (printed inside the rim) or if the rim or the tyre is
defective or damaged.
Never exceed the pressure recommended by the tyre manufacturer.
The tyre changer is not a safety device and does not prevent tyres and rims from
exploding. Keep all persons not working on the machine out of the working area.
DANGER
7. Risk of crushing. Presence of moving parts. Contact with moving
parts can cause accidents.
The machine can only be used by one operator at a time.
•Keepbystandersawayfromthetyrechanger.
•Keepyourhands andngersawayfromthe rimedgeduringthe
demounting and mounting process.
•Keephandsandngersclearofmount/demountheadduringoperation.
•Keepyourhandsandotherbodypartsawayfrommovingparts.
•Donotusetoolsotherthanthosesuppliedwithtyrechanger.
•Uselubricantthatisspecicfortyresinordertopreventtyreseizure.
•Payattentionwhilehandlingtherimorthetyreandwhileusingthe
lever
8. Danger of electric shock.
•Donotcleanelectricpartswithwaterorhighpressureairjets.
•Donotoperatethemachineinthepresenceofadamagedelectrical
cable.
•Ifanextensionisnecessary,useacablewithratedfeaturesequalto
or greater than those of the machine. Cables with rated features that are lower than those
of the machine could overheat and cause a re.

Table of Contents