Cold Nitro Brew BIB Dispenser Operator’s Manual
© 2017, Cornelius Inc. ‐ 19 ‐ Publication Number: 621058723OPR
3
A. Open the new BIB box to expose the bag outlet
connector.
B. Remove the protective white cap from the outlet con‐
nector and discard.
4
A. Orient the BIB as shown and place it into the cabinet.
B. Connect the dispenser product line to the BIB by
pressing its BLACK connector into the BIB outlet while
rotating the threaded ring clockwise. Ensure it
is secure and not leaking.
C. Close the cabinet door.
5
A. Dispense about 8 to 10 oz. of product to remove any trapped air in the lines.
B. Check foam height and adjust if required by referring to the next section, Unit
Foam Head Height Adjustment.
Table 5.
Step Action
To Next Page
Loading...
