3 TD 184
ORIGINAL OWNER, END-USER
RESPONSIBILITY
1. To verify the equipment installation date by the
return of the warranty registration card to the fac-
tory within five days of the installation.
2. To pay freight or handling charge.
3. To pay for service labor and/or parts required to
correct improperly installed equipment. Installation
must comply with the installation instructions.
4. To pay for normal maintenance, adjustments and
cleaning.
5. To pay for service labor and/or parts required to
correct unit modification or the use of non-ap-
proved remote condensers.
6. To pay for service labor and/or parts required be-
cause of neglect, abuse, misuse, accident, fire,
flood, freezing or any act of God.
7. To pay for mileage, truck charges, travel time, pre-
mium labor for holidays, weekends or after hours
work, flat rate service call charges, miscellaneous
tool charges, use of diagnostic meters or equip-
ment and all material not listed on the Warranty
Time Rate Guide.
To Next Page
Loading...
