Cornelius VIPER FMFV - Page 18

FMFV - Installation Manual
© 2018-19, Cornelius Inc. - 14 - Publication Number: 919000012INS
11.
Put back the face plate
ensure the O-ring and seal are properly
assembled and not damaged
Gasket O-ring
Figure 19.
12.
Assemble Hex Nut using adjustable
wrench.
Figure 20.
13.
Loosen the grub screws of the valve
assembly using 3/32” Allen key and
reorient the air valve assembly such a
way that, the quick connector should
face towards C-box mounted on viper.
Tighten the grub screw to secure the
position of air valve assembly.
Figure 21.
Table 5: Installation of Valve
FMFV Valve
Grub
screw
Quick
connector
orientation