FMFV - Installation Manual
Publication Number: 919000012INS - 25 - © 2018-19, Cornelius Inc.
9
Brix window will open.
Select any one flavour.
Set Pour Timeout as 10
press “Pour” tab
Figure 44.
10
Liquid starts to dispense through Valve, press the “Pour” tab until residue of liquid comes
out from the valve.
11
Repeat the “Pour” cycle for all the liquid lines sequentially by repeating the steps #9 and
#10.
12
Ensure all the flavour lines should hold detergent solution for minimum of 10 minutes, but
no more than 15 minutes.
13 Take 20 liters (5.28 gallon) bucket and fill water Approximately 12 Liter (3 gallon).
14
Immerse all BIB connectors con-
nected with sanitizing fitting (P/N
28688) in the bucket having rinse
water.
Figure 45.
15 Repeat the steps From #6 to #11
16
Take 20 liters (5.28 gallon) bucket and fill Portable water approximately 12 liters (3.1 gal-
lon) of 20°c - 38°C (70°F - 100°F) add 39 g (1.3 Oz) of household bleach to create sani-
tizing solution.
IMPORTANT: The sanitizing solution must not exceed 200 PPM
chlorine.
17
Immerse all BIB connectors con-
nected with sanitizing fitting (P/N
28688) in the bucket having sani-
tizing solution.
Figure 46.
Table 8
To Next Page
Loading...
