Standard Recommended Procedure 003-794-AEN | Issue 14 | March 2020 | Page 22 of 27
Step 3: Tray Location (Figure 28))
Identify location of tray within the housing/chassis. Trays come pre-labeled 01 to 12 from the bottom
to the top of the chassis.
Figure 28 —Tray Label Location
Step 4: Module Location with Fiber or Port Range (Figure 29)
Each tray comes pre-labeled A through D to identify Module position within the tray.
Figure 29 — Module Label Location
To Next Page
Loading...
