Preface
MA1000 Installation and Configuration Guide
IV
Care of Fiber Optic Connectors
• Do not remove the protective covers on the fiber optic connectors until a connection is ready to be made.
Do not leave connectors uncovered when not connected.
• The tip of the fiber optic connector should not come into contact with any object or dust.
• Refer to the cleaning procedure for information on the cleaning of the fiber tip.
Power Requirements for DC Inputs
Warning!
• Only use a special DC supply cable with four connectors
• Always keep DC IN connectors connected during the product operation
• Disconnect all power from the equipment by means of an external circuit breaker before connecting or
disconnecting the DC IN connectors.
To Next Page
Loading...
