corob D800 HD - Installation; Packing and Handling

16 - SHIPPING, HANDLING AND UNPACKING
COROB™ D800 HD
4.3.1 Adjusting the support feet
1 x 19 mm To adjust machine feet
1
2
3
a
b
c
a
b
Standard material supplied4.3.2
After unpacking the machine, make sure the following items are present:
Power supply cable.1. Computer power cables.2.
USB cable.3. RS232 cable.4.
Spare fuses.5. Panel key.6.
Phillips screwdriver and T-wrench.7. Spare parts for humidier cap.8.
User’s manual.9.
Make sure that all of the above items are included in the packing; if not, contact the manufacturer.
Installation4.4
Once the machine has been unpacked and placed in its operating site, it must be installed.
WARNING
Only qualied and appropriately trained personnel are authorized to install the machine.
Packing and handling4.5
To repack the machine, follow the unpacking instructions in reverse order. We recommend reusing the original
packing any time the dispenser must be moved or shipped.
Use appropriate equipment to move the packed machine. If stored, the machine must be kept in a protected,
dry environment, not subjected to harsh weather, to avoid damaging the electrical components.
WARNING
Do not stack items on the packing.