TECHNICAL SPECIFICATIONS - 35
ORIGINAL INSTRUCTIONS
8 TECHNICAL SPECIFICATIONS
8.1 Technical data
Power supply Single-phase 100 - 240 V ~ ± 10%
Frequency 50/60 Hz
Fuses F 10 A
Maximum power absorbed 500 W
Noise level Level of equivalent acoustic pressure: < 70 dB (A)
Environment working conditions*
Temperature: between 10 °C (50 °F) and 40 °C (104 °F)
Relative humidity: between 5% and 85%, without condensation
Vibrations
The machine does not transmit vibrations to the oor that may compro-
mise the stability and precision of any nearby equipment.
Dispensing technology gear pump
Dispensing system simultaneous
Dispensing center external
Type of canisters all-purpose (POM acetalic resin)
Type of valves electrovalves
Minimum dispensed quantity** 1/768 US oz (0,0385 ml)
Theoretical resolution** 0,001339 cc/step
* The environment working conditions are strictly related to the type of colorants used (ask for information from the paint manufacturer). The
data shown are valid for the machine only.
** Values highly affected by the nature of the colorants and their rheological properties.
To Next Page
Loading...
