74
Recovery Error Codes
0xF8 Recovery PPI is not available
0xF9 Recovery capsule is not found
0xFA Invalid recovery capsule
0xFB – 0xFF Reserved for future AMI error codes
PEI Beep Codes
# of Beeps Description
1 Memory not installed
1 Memory was installed twice (InstallPeiMemory routine in PEI called twice
2 Recovery started
3 DXEIPL was not found
4 DXE Core Firmware Volume was not found
5 Recovery Failed
6 S3 Resume Failed
7 Reset PPI is not available
DXE Phase
Status Code Description
0x60 DXE Core is started
0x61 NVRAM initialization
0x62 Installation of the Southbridge Runtime services
0x63 CPU DXE initialization is started
0x64 CPU DXE initialization (CPU Module specific)
0x65 CPU DXE initialization (CPU Module specific)
0x66 CPU DXE initialization (CPU Module specific)
0x67 CPU DXE initialization (CPU Module specific)
0x68 PCI host bridge initialization
0x69 Northbridge DXE initialization is started
0x6A Northbridge DXE SMM initialization is started
0x6B Northbridge DXE initialization (NB module specific)
0x6C Northbridge DXE initialization (NB module specific)
To Next Page
Loading...