Corvalent Q77AX - Page 75

75
Status Code Description
0x6D Northbridge DXE initialization (NB module specific)
0x6E Northbridge DXE initialization (NB module specific)
0x6F Northbridge DXE initialization (NB module specific)
0x70 Southbridge DXE initialization is started
0x71 Southbridge DXE SMM initialization is started
0x72 Southbridge devices initialization
0x73 Southbridge DXE initialization (SB module specific)
0x74 Southbridge DXE initialization (SB module specific)
0x75 Southbridge DXE initialization (SB module specific)
0x76 Southbridge DXE initialization (SB module specific)
0x77 Southbridge DXE initialization (SB module specific)
0x78 ACPI module initialization
0x79 CSM initialization
0x7A – 0x7F Reserved for future AMI DXE codes
0x80 – 0x8F OEM DXE initialization codes
0x90 Boot Device Selection (BDS phase is started
0x91 Driver connecting is started
0x92 PCI bus initialization is started
0x93 PCI bus Hot Plug Controller initialization
0x94 PCI Bus enumeration
0x95 PCI Bus request resources
0x96 PCI bus assign resources
0x97 Console output devices connect
0x98 Console input devices connect
0x99 Super IO initialization
0x9A USB initialization is started
0x9B USB reset
0x9C USB detect
0x9D USB enable
0x9E – 0x9F Reserved for future AMI codes
0xA0 IDE initialization is started
0xA1 IDE reset
0xA2 IDE detect