We reserve the right to modify the product and the design.47
USER
MANUAL
raising the vehicle
The vehicle is equipped with an area at the front (1) and another at the rear
(2) to facilitate its elevation.
Before raising the vehicle, make sure the brake is fully on and that
the surface is flat and completely horizontal.
Do not perform any operation or service while the vehicle is being
lifted.
Do not touch the vehicle or get into it until it is fully raised and
secured, as this could destabilise the vehicle and cause it to overturn.
1. Place the base of the jack in the area indicated in the vehicle.
2. Raise the vehicle slowly, checking that it is stable.
1
2
To Next Page
Loading...
