coship CDVB 2300C - Volume & Audio Control; Position; Sat

23
5.6 Volume & Audio Control
1. Volume Control
To increase or decrease volume, use VOL+/- Key on the RCU
or on the front panel.
Note: The STB has 18 volume levels and this can be con-
trolled from the volume level of your TV.
2. Mute
To mute the sound, press button on the RCU. To bring
back the normal sound, press this key once again.
3. Audio Control
Press the AUDIO R/L key repeatedly to select one of three
possible Audio settings (Left, Right and Stereo)
The current audio setting will be displayed in the channel infor-
mation
4. Language Selection
Press the AUDIO key on the RCU repeatedly to select audio-
language. This is dependent on the transmission of audio
signal.
5.7 Position
If you need to adjust the antenna more accurately, press PO-
SITION key on the RCU and the position bar will be displayed.
Press or key on the RCU to adjust.
You can also use this function for manual search instead of
Auto tracking.
5.8 Sat
If you searched channels from more than one satellite and
want to have a channel list for each satellite, press SAT key
on the RCU, a satellite list will be displayed.