14) Turn the escape hatch handle to retract the
arms and install it into the escape hatch opening
of the center panel. (Figure 49)
CAUTION
Verify the functionality of the escape hatch’s
release mechanism prior to installation and
before use. Please insure that the hatch’s arms
are retracted when open and non-retracted when
closed. (Figure 50)
WARNING
Failure to install the escape hatch properly may
impede performance of the Evolution cover such
as vapor leakage, water infiltration and
unwanted access to hot tube.
All security risks such as drowning, injury or
undesired entry due to an open Evolution cover
without an escape hatch installed are not
approved by Covana and product certification
will be void.
To Next Page
Loading...
