Covidien Kangaroo - Section 15 Electromagnetic Conformity Declaration

Kangaroo™ Connect Enteral Feeding Pump | 28
Table of Contents
The Kangaroo Connect pump, WCH and WiFi module has been built and tested according to UL 60601-1 (2nd Edition), ES60601-1(3rd Edition),
CAN/CSA C22.2 No. 60601-1-08, and EN60601-1-2 Standards.
The pump, WCH and WiFi module are intended for use in the electromagnetic environment specified below. The user of the pump should
assure that it is used in such an environment.
Section 15 — Electromagnetic Conformity Declaration
Guidance and Manufacturer’s Declaration – Electromagnetic Emissions
The Kangaroo Connect pump is intended for use in the electromagnetic environment specified below. The user of the Kangaroo Connect
pump should assure that it is used in such an environment.
Emissions Test Compliance Electromagnetic Environment - Guidance
RF emissions
(CISPR 11)
Group 1 The pump, WCH and WiFi module use RF energy for its internal
function. The Kangaroo Connect pump, WCH and WiFi module
must emit electromagnetic energy in order to perform its intended
function. Nearby electronic equipment may be affected.
RF emissions
(CISPR 11)
Class B The pump, WCH and WiFi module are suitable for use in all
establishments, including domestic establishments and those
directly connected to the public low- voltage power supply network
that supplies buildings used for domestic purposes.
Radiated Disturbance Immunity
(EN60601-1-2 / IEC 61000-4-3: 2006 + A1: 2007 +
A2: 2010)
Complies
Conducted Disturbance Immunity
(EN60601-1-2 / IEC 61000-4-6:2013)
Complies
Power Frequency Magnetic Field Immunity
(EN60601-1-2 / IEC 61000-4-8:2009)
Complies
Voltage dips and sags Immunity
(EN60601-1-2 / IEC 61000-4-11:2004)
Complies
Electrical Fast Transient / Bursts Immunity
(EN60601-1-2 / IEC 61000-4-4:2012)
Complies
Electrostatic Discharge Immunity
(EN60601-1-2 / IEC 61000-4-2:2008)
Complies
Surge Immunity
(EN60601-1-2 / IEC 61000-4-5:20005 +Cor 1: 2009)
Complies